Affiliation:
1. Center for Emerging Sciences, Engineering, and Technologies, Pakistan
Abstract
This chapter gives an overview of Quickstep processing method, which is relatively a new technique for manufacturing composites. In this chapter, different aspects of Quickstep processing are highlighted. Since Quickstep processing is an Out-Of-Autoclave (OOA) technique, a brief description of autoclave processing is provided. Basic principle of Quickstep processing and functionality of typical Quickstep plant are also explained. Due to changed chemo-rheology, methodology for cure optimization of different prepregs and composites are discussed with examples. This chapter also includes the literature survey of different aerospace materials being investigated in Quickstep, the potential of new materials development for this process, the melding technique, in service capabilities of Quickstep cured samples and journey of Quickstep from patent to commercialization. Although the technique is commercialized now, few suggestions in the end are provided for the improvement of process.
Reference102 articles.
1. An evaluation of the performance of advanced melded composite joints
2. Cure behaviour and void development within rapidly cured out-of-autoclave composites
3. Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite
4. Akovali, G. (2001). Handbook of composite fabrication. Shropshire, UK: iSmithers Rapra Publishing.
5. Alderson, K., Day, R. J., Myler, P., & Mohsen, Z. (2011). Resin development for rapid composite processing by fluid-controlled heat transfer. Paper presented at the ICCS-16, Porto, Portugal.