Analysis of Hardness by Parametric Optimization of Gravity Die Casting for A-356 Aluminium Alloy Using Taguchi Technique-Reference-Cited by-同舟云学术

Analysis of Hardness by Parametric Optimization of Gravity Die Casting for A-356 Aluminium Alloy Using Taguchi Technique

Published:2015-01 Issue:1 Volume:5 Page:21-34
ISSN:2156-1680
Container-title:International Journal of Manufacturing, Materials, and Mechanical Engineering
language:en
Short-container-title:

Author:

Karna Shyam Kumar¹,Singh Ran Vijay¹,Sahai Rajeshwar²

Affiliation:

1. Manav Rachna International University, Faridabad, India

2. BS Anangpuria Institute of Technology and Management, Faridabad, India

Abstract

This paper attempts to investigate Hkb Box (A-356 aluminium alloy) manufactured by Gravity Die casting process. Main objective of this research paper is to find the most influencing parameters on hardness of gravity die casting. Taguchi Technique is a powerful and efficient method for optimizing the process, quality and performance output of manufacturing processes. Taguchi's orthogonal array method and S/N Ratio were used for experiments and it was found that Pouring Time and Pouring Temperature are the most influencing parameters to improve hardness. Finally ANOVA was used to confirm the design of experiment.

Publisher

IGI Global

Subject

Mechanical Engineering,Mechanics of Materials

Reference32 articles.

1. The influence of different casting method on solidification time and mechanical properties of AL- SN castings.;E. J.Abed;IACSIT International Journal of Engineering and Technology,2011

2. Investigation on the Rate of Solidification and Mould Heating in the Casting of Commercially Pure Aluminium in Permanent Moulds of varying Thicknesses

3. Bedi, K. (2011). Quality Management. Oxford university press, 543-569.

4. A Study on the Blended Wax Patterns in Investment Casting Process;O.Bemblage;Proceedings of the World Congress on Engineering 2011,2011

5. Statistical tools for improving designs.;G.Box;Mechanical Engineering (New York, N.Y.),1988

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Investigation on Cutting Force, Flank Wear, and Surface Roughness in Machining of the A356-TiB2/TiC in-situ Composites;International Journal of Materials Forming and Machining Processes;2018-07