Abstract
As constant yarn feeding tension is essential in the formation of uniform stitches, the lack of a monitoring system in a circular weft knitting machine capable of measuring the uniformity of the yarn feeding speed in different driven belts and comparing the feeding rate during the knitting process has led to the use of experimental methods which are dependent on skilled operators. Additionally, in the case of any defects, the equalisation is done by the operator using the trial-and-error method, which consequently increases the risk of human error. Considering the importance of a uniform adjustment of yarn feeding speed on the quality of final fabrics, a monitoring system for measuring and reporting yarn feeding speed was designed. Following its installation on a circular weft knitting machine, the performance of the system in an industrial environment was evaluated. A comparison with the traditional system proved the functionality of the designed automation process. The current study highlights the characteristics of an appropriate sensor, the applicable installation place and direct data reception without intermediaries.
Subject
Industrial and Manufacturing Engineering,Polymers and Plastics,General Business, Management and Accounting,Business and International Management
Reference18 articles.
1. DURU, S.C., CANDAN, C., MUGAN, A. Effect of yarn, machine and knitting process parameters on the dynamics of the circular knitting needle. Textile Research Journal, 2015, 85(6), 568–589, doi: 10.1177/0040517514547216.
2. KOO, Y.S. Correlation of yarn tension with parameters in the knitting process. Fibers and Polymers, 2002, 3(2), 80–84, doi: 10.1007/BF02875404.
3. SARKER, M.E., ISLAM, M.R., MAHMUD, M.S., ISLAM, M.Z., ALIMUZZAMAN, S., AHMED, A. F. Effects of yarn, fabric and machine parameters on the dimensional properties of weft knitted single jersey fabric. Journal of Natural Fibers, 2022, 19(17), 15625–15636, doi: 10.1080/15440478.2022.2131682.
4. MUNDEN, D.L. 26–The geometry and dimensional properties of plain-knit fabrics. Journal of the Textile Institute Transactions, 1959, 50(7), T448–T471, doi: 10.1080/19447025908659923.
5. FATKIĆ, E., GERŠAK, J., UJEVIĆ, D. Influence of knitting parameters on the mechanical properties of plain jersey weft knitted fabrics. Fibres & Textiles in Eastern Europe, 2011, 19(5), 87–91.