STUDY OF THE PROCESS OF COATING FORMATION DURING MICROARC OXIDATION OF TITANIUM-Reference-Cited by-同舟云学术

STUDY OF THE PROCESS OF COATING FORMATION DURING MICROARC OXIDATION OF TITANIUM

Published:2024-06-29 Issue:2(14) Volume:1 Page:370-378
ISSN:3006-0524
Container-title:Bulletin of Shakarim University. Technical Sciences
language:
Short-container-title:jour

Author:

Serikbekuly N.¹,Ormanbekov K. D.¹,Shynarbek A. B.¹,Zhassulan A. Zh.¹^ORCID

Affiliation:

1. Shakarim University of Semey; Scientific center «Surface modification of materials»

Abstract

In this work, the structural-phase state of coatings formed on the surface of titanium by microarc oxidation (MAO) was studied. During the research, a number of experiments were carried out in which the process parameters and electrolyte composition were changed. Morphological and structural changes of the coatings were analyzed using various analytical methods, including electron microscopy and x-ray diffraction. Microarc oxidation of titanium was carried out in anodic potentiostatic mode for 10 minutes in various electrolytes based on phosphoric acid, sodium orthophosphate, potassium hydroxide and hydroxyapatite. After MDO, the microgeometry of the surface does not change, i.e. a thin coating 5-7 microns thick is formed on the titanium surface. The results of studying the surface of coatings using scanning electron microscopy showed that the most porous surface of all the studied coatings was found in coatings formed in an electrolyte with the addition of potassium hydroxide (KOH). The results of X-ray diffraction analysis showed that the main phase of the coatings are anatase and rutile. Electrolyte composition is one of the main factors in the MAO process. The research results allow us to deeply understand the process of coating formation during microarc oxidation of titanium.

Publisher

Shakarim University

Reference18 articles.

1. Vladimirov B.V. Mikrodugovoe oksidirovanie magnievykh splavov (obzor) / B.V. Vladimirov i dr. // Ehlektronnaya obrabotka materialov. – 2014. – № 3. – S. 1-38. (In Russian).

2. Batyshev K.A. Mikrodugovoe oksidirovanie alyuminievykh splavov / K.A. Batyshev, A.I. Batyshev // Sovremennye tekhnologii v mashinostroenii i liteinom proizvodstve. – 2016. – S. 212-214. (In Russian).

3. Nechaev G.G. Mikrodugovoe oksidirovanie titanovykh splavov v shchelochnykh ehlektrolitakh / G.G. Nechaev // Kondensirovannye sredy i mezhfaznye granitsy. – 2012. – T. 14, № 4. – S. 453-455. (In Russian).

4. Esmaili S. Korrozionnoe povedenie i biosovmestimost' pokrytii s oksidom grafena, poluchennykh metodom mikrodugovogo oksidirovaniya na magnievom splave / S. Esmaili et al // Fizicheskaya mezomekhanika. – 2022. – T. 25, № 4. – S. 122-138. (In Russian).

5. Savushkina S.V. Issledovanie keramikopodobnykh pokrytii, formiruemykh na alyuminievykh kompozitakh metodom mikrodugovogo oksidirovaniya / S.V. Savushkina i dr. // XIV-ya Mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya «Bystrozakalennye materialy i pokrytiYA». 29-30 noyabrya 2016 goda. – Litres, 2022. – S. 87. (In Russian).