Affiliation:
1. I-Shou University, Kaohsiung, TAIWAN
2. Ampkel Technology Ltd., TAIWAN
Abstract
In the decade of digital electronics, no matter what type is, high-value, high-complexity, high-performance devices (such as the main microprocessor core in smart phones) is undoubtedly crucial. However, simple discrete circuit components (such as capacitors, resistors, diodes, transistors, etc.) are also essential for mobile phones. In order to continue to increase functionality and reliability, reduce size and power consumption, reduce costs, and any function we seek in electronic equipment, there is always the basic principle of squeezing everything onto the same semiconductor chip. However, in some unavoidable situations, not all circuit components can run on the same chip. This service system uses a copper substrate as the core material for packaging, and can package chips with high bonding density. It provides a universal service platform for packaged products called: Scalable Universal Copper-based Packaging (CopperPak) service system. This service system is attributed to copper-based packaging (CopperPak) as a solution for expansion packaging, which can package the chip on the multifunctional component as much as possible. Scalable universal copper-based packaging (CopperPak) service system, including miniature copper-based packaging (TyniCopk) and large-scale copper-based packaging (MassyCopk) modules, used to package discrete circuit components, not only solve the discrete circuit components size, heat transfer and positioning alignment issues, and simplify the packaging process and improve yield rate.
Publisher
North Atlantic University Union (NAUN)
Subject
Electrical and Electronic Engineering,Signal Processing
Reference11 articles.
1. W. H. Li and S. W. Joelle Ong, "Cu diffusion in Ag-plated Cu lead frame packages", Mircoelectron. Reliab., vol. 52, no. 7, pp. 1523-1527, Jul. 2012.
2. Wu-Hu Li, A. Acuesta, M. G. Mercado, N. T. Malonzo and R. S. Cabral, "Cu wire bonding in Ni/Pd/Au-Ag and roughened Ni/Pd/Au-Ag pre-plated leadframe packages," 2011 IEEE 13th Electronics Packaging Technology Conference, Singapore, pp. 794-797, 2011
3. T. Y. Lin, M. G. Pecht, D. Das, J. Pan and W. Zhu, "The evaluation of copper migration during the die attach curing and second wire bonding process", IEEE Trans. Compon. Packag. Technol., vol. 28, no. 2, pp. 337-344, Jun. 2005.
4. Razali, N., Omar, G., Esa, S.R., Jasmee, S., Kamarolzaman, A.A, “Effect of annealing temperature on the surface properties of copper-based leadframe," Journal of Advanced Research in Fluid Mechanics and Thermal Sciences , pp. 266-273, 2018.
5. J. R. Huo, S. G. Qiang, J. Jiang, W. J. Tao and L. Wen Kong, "Advance Embedded Packaging for Power Discrete Device," Trans. On 2019 IEEE 69th Electronic Components and Technology Conference (ECTC), pp. 1485-1491, 2019.