Abstract
In this study, a method to evaluate the electro-magnetic damping effect produced by the movement of a permanent magnet inside of a conductive pipe, is proposed. Neither the residual flux density of the magnet, nor the electric conductivity of the pipe is required, but instead, only the magnet height, the pipe length, and the falling time of the magnet inside the tube, are necessary to compute the damping coefficient. Accordingly, cylindrical neodymium magnets of close residual flux densities, but various diameters and heights, are tested against copper pipes of various thicknesses. Using the falling time measured for each magnet-pipe combination, the corresponding damping coefficient is computed, and the influence of various geometrical parameters on the damping coefficient is clarified. Clearance between the magnet and pipe is identified as essential to describe this damping phenomenon.
Publisher
European Open Science Publishing