The cellular traffic capacity model of toll station square
-
Published:2023-09-30
Issue:3
Volume:67
Page:35-47
-
ISSN:0866-9546
-
Container-title:Archives of Transport
-
language:
-
Short-container-title:AoT
Author:
Bai Yuning1ORCID, Wang Kaixuan2ORCID, Yi Lei2ORCID, Peng Bo1ORCID
Affiliation:
1. Ningxia Jiaotou Expressway Management Co., Ltd. Yinchuan 750000, China 2. School of Traffic and Transportation, Chongqing Jiaotong University, Chongqing 400074, China
Abstract
Traffic capacity is an important index to measure the operation efficiency of expressway toll stations. In order to pro-vide relevant theoretical support for accurately evaluating the congestion degree and service level of toll stations, this paper establishes a traffic capacity calculation model for the square in front of expressway toll stations based on the traditional cellular transmission method. Firstly, by dividing the square in front of the station into regular cells, the process of calculating the traffic capacity is simplified; Secondly, the capacity model of the square in front of the station is established based on cellular transmission, and a large amount of data is collected through the monitoring videos of several toll stations. The theoretical capacity of the square in front of the station is calculated by using the important parameters of the model calibrated by the measured data under different lengths of the square in front of the station and the configuration of toll lanes. Then, the simulation platform of VISSIM software is used, and many experi-ments are carried out with relevant measured data to verify the accuracy of the model in multiple scenarios. Finally, the simulation value of the capacity of the square in front of the station is obtained, and the error is calculated by using the simulation value and the calculation value. The results show that the error of the verification result is 5.19%, and the error is within the allowable range, which shows that the model is accurate and feasible. The theoretical capacity calculated by the capacity model of the square in front of the toll station established in this paper is com-pared with the actual capacity, which can be used as a standard to judge the congestion degree of the square in front of the toll station and further provide a theoretical reference for evacuation of congestion.
Publisher
Politechnika Warszawska - Warsaw University of Technology
Subject
Transportation,Automotive Engineering
Reference30 articles.
1. Wang, K., Peng, W., Xin, C., & Lu, T. Z. (2020). Multiobjective optimization design of toll plaza, Mathematical Problems in Engineering, 2324894, 9 pages, 2020. 2. Lu, X. Y., Varaiya, P., Horowitz, R. (2010). A new approach for combined freeway variable speed limits and coordinated ramp metering. Intelligent Transportation Systems (ITSC). 3. Kumar, A., Thakare, A., & Tawalare, A.(2020). Strategy to reduce queuing time at toll plaza. Lecture Notes in Civil Engineering, 453-464. 4. Liu, C. L., Sha, T., Zhao, C., Ji, Y. X., & Du, Y. C. (2022). Optimal deployment of electronic toll collection lanes for freeway network. China Journal of Highway and Transport, 35(05), 179-188. 5. Saad, M., Abdel-Aty, & Mohamed L. (2019). Analysis of driving behavior at expressway toll plazas. Transportation Research Part F: Traffic Psychology and Behaviour, 163-177.
|
|