Suspended nanocrystalline diamond ridge waveguides designed for the mid-infrared

Abstract

Abstract A comprehensive study and design of air-clad suspended ridge diamond waveguides for operation across the 2.5–16 µm spectral range is presented, specifically targeting nanocrystalline diamond (NCD) thin films directly grown on silicon substrates. Three film thicknesses of 520, 1000 and 2000 nm are considered, to cover overlapping sub-bands of 2.5–5, 4–9 and 8–16 µm, respectively. Within each sub-band, the waveguide dimensions for single mode quasi-TE operation are found and the waveguide material losses and bending losses are estimated at each design point. In addition, in each case the minimum required undercut depth and etch hole placement for optical isolation of the waveguide mode from the silicon substrate is also quantified. We also estimate the losses associated with scattering from surface roughness, which is an unavoidable byproduct of the NCD thin film growth process. Our results indicate that despite the relatively low film thickness-to-wavelength ratio, mechanically stable waveguides with good optical confinement and low material and bending losses can be realised to cover the full 2.5–16 µm range. In addition, scattering loss estimations predict a drastic drop in roughness-induced scattering losses above 6 µm, even for relatively rough films. In addition to highlighting the utility of suspended NCD as a versatile platform for mid-infrared integrated photonics, the approaches and results presented here can be used to inform the design of suspended air-clad waveguides in other material platforms.