Inkjet-printed low temperature co-fired ceramics: process development for customized LTCC

Abstract

Abstract This paper investigates the utilization of digital printing technologies for the fabrication of low temperature co-fired ceramics (LTCC). LTCC offer great opportunities for applications such as antennas, sensors or actuators due to their outstanding properties like low dielectric loss, low permittivity, low coefficient of thermal expansion and at the same time high reliability in harsh environments (heat, humidity, and radiation). LTCC are multilayer circuits that are typically functionalized by screen-printing. This publication investigates the replacement of screen-printing by digital printing processes, such as inkjet and Aerosol Jet printing, to facilitate a more resource-friendly and customizable manufacturing of LTCC. The use of digital printing technologies not only streamlines small-scale productions and development processes but also offers the advantage of achieving miniaturization down to single-digit microns. In this publication, digital printing processes, filling of vias, lamination processes, co-firing at 850 °C and printing on fired LTCC were investigated. Three layers of nanoparticle silver ink were printed on green LTCC tape and 100% of the embedded printed structures were conductive after co-firing. Filling of vias with inkjet printing was investigated and the most important process parameters were found to be the clustering of vias, the amount of active nozzles and the substrate temperature. Printing on fired LTCC demonstrated high precision, and sintering at 600 °C achieved strong adhesion of printed structures to LTCC. These successful findings culminate in presenting a process chain for fully maskless structured, multilayer LTCC.