Transient research on distribution networks incorporating superconducting cables utilizing field–circuit coupling method

Abstract

Abstract High temperature superconducting (HTS) cable represents a promising solution for fulfilling the power demands of cities with large loads and high density. However, due to their connection to the distribution network, HTS cables are vulnerable to fault currents exceeding ten times their rated current, which poses a serious threat to both the safety of the cable and the operation of the grid. Considering the highly nonlinear nature of superconducting conductivity, this study develops a field–circuit coupling model to investigate the transient characteristics of distribution networks incorporating superconducting cables (DNSC). Firstly, a finite element model based on the two-dimensional H formulation was built to calculate the electrical and thermal parameters of the HTS cable. Subsequently, an equivalent circuit model of the distribution network was employed to estimate the short-circuit currents. Communicating via a co-simulation server, the superconducting cable current and distribution network impedance were updated in each step. Further, based on an actual DNSC system in Shenzhen, China, the highest quenching temperature of the cable and the maximum fault current of busbars were assessed. Finally, by integrating current limiters into the system, the withstand capability of the cable and busbars was determined, which indicates that the improved protection configuration can effectively suppress fault currents and ensure safe operation. Successfully applied to an actual distribution network, the co-simulation model utilizing the field–circuit coupling method addresses the challenges of solving highly nonlinear and time-varying systems, enabling transient analysis and protection research for the integration of superconducting devices into the conventional grid.