Flux jump and mechanical response in inhomogeneous high-temperature superconductor under the pulsed-field magnetization

Abstract

Abstract The high-temperature bulk superconductors with high critical current density are brittle, and can be damaged by large Lorentz forces and thermal stress during magnetization. Several studies have reported the failure of bulk superconductors during flux jumps. In this study, we analyzed the magnetization characteristics and mechanical response of the HTS bulk with inhomogeneous current density along the c-axis. The numerical simulation was consistent with the experimental results presented in the reference. Moreover, a flux jump occurred near the area of the pre-arrangement flux during the second pulsed field magnetization. The maximum temperature is lower than the critical temperature during the flux jump. In the mechanical analysis, the flux jump led to an abrupt change in the maximum stress of the bulk, and the maximum radial stress was significantly higher than the maximum hoop stress during the flux jump. The maximum radial stress increased with decreasing ambient temperature during the flux jump, and the maximum stress area was always near the seeded plane. Subsequently, the magnetization characteristics and mechanical response were studied for different locations of the seeded surface, two concentric superconducting bulks, and non-uniform fields.