Dynamic guidance performance of GdBaCuO and YBaCuO bulk single grain superconductors under a varying external magnetic field

Abstract

Abstract High temperature superconducting (HTS) maglev technology has attracted considerable attention from researchers around the world. It provides a new direction of development for urban rail and high-speed rail transit due to its considerable advantages of frictionless transportation, low noise, and environmental protection. HTS bulk materials are able to provide a significant performance advantage to maglev technology and are a key component to achieving both levitation and vehicle guidance. HTS bulk samples with enhanced flux pinning characteristics can enable improved curve negotiating ability and lateral stability for the maglev vehicle. This paper reports the results of experiments on the dynamic guidance force of single grain Y–Ba–Cu–O (YBCO) and Gd–Ba–Cu–O (GdBCO) bulk HTS single grains in order to explore their potential for enhanced maglev guidance performance. A customized HTS maglev dynamic measurement system (SCML-03) with a rotating, circular permanent magnet guideway (PMG) was employed to simulate the dynamic operation of the HTS vehicle above the PMG at different translational speeds. It was observed from the experimental results that the GdBCO bulk superconductor is more able to resist the attenuation of the dynamic guidance force compared to YBCO under the same operational conditions. In addition, the GdBCO bulk single grain is more able to return to the original equilibrium position following exposure to an external displacement. It is concluded that the GdBCO bulk single grain offers greater potential than YBCO for practical application in HTS maglev given its enhanced guidance performance. The results of these tests provide an important benchmark for the future design of HTS maglev transportation systems.