Unveiling the formation and control of unique swirling discharge pattern in helium plasma candle device

Abstract

Abstract The generation of a large cold plasma jet while maintaining the reproducibility and homogeneity of the discharge is one of the major challenges encountered by the plasma community to efficiently apply this technology in the industry. Here, we report on the discharge in a recently developed device called the plasma candle (PC), wherein a stable plasma jet with a diameter of 20 mm can be generated at atmospheric pressure and temperature. Unlike the discharge morphology previously reported for conventional plasma jet devices, the unique configuration of PC device resulted in distinctive discharge patterns. Homogenous discharge was generated in the electrode gap and followed by a swirling discharge toward the tube nozzle. Fast photography and electrical measurements revealed that filament propagation and its morphology form the visually observable swirl discharge. Detailed analysis indicated that residual helium metastable species (Hem) and their penning ionization play an essential role in the discharge mode and its transition, which was verified by changing the feeding gas and the frequency of the applied voltage. For instance, it is found that only filamentary discharge was observed along the entire tube at frequencies less than 3 kHz, at which the time between consecutive discharges was long enough for Hem decay. Consequently, the homogenous discharge pattern was recovered by increasing the pre-ionization levels by adding a trace of impurities (N2, O2 or H2O) to the feeding gas. However, the level of these impurities must be carefully adjusted to achieve a homogenous discharge without negatively affecting the jet properties. A trivial change in the gas impurity, in the range of adsorption and desorption of water from the gas tubing, is sufficient to cause a noticeable change and instability in the discharge mode. This finding is critical to predicting the production of reactive species and plasma-surface interaction for different applications.