DBD-like and electrolytic regimes in pulsed and AC driven discharges in contact with water

Abstract

Abstract The interaction of an ambient air plasma with a water surface in a pin–water electrode configuration is presented in a polydiagnostic study. A discharge was generated by applying different high-voltage (HV) waveforms to a metallic pin electrode, positioned 2 mm above the water surface of a Petri dish filled with demineralized water. For pulsed discharge operation, a clear distinction is observed between a dielectric barrier discharge regime featuring a transient discharge at the rising as well as at the falling slope of the HV pulse, while a steady discharge is present in the gap during the complete HV pulse for the electrolysis regime. The occurrence of those two regimes is coupled to the increasing conductivity of the water over time, which additionally results in a quick rise of the dissipated discharge power and an increase of the gas temperature. The AC driven discharges exhibit only the electrolysis regime and do not significantly evolve over the treatment time. The resulting water conductivity was found to be a function of the total dissipated energy, irrespective of the discharge driving mode. Additionally, the resulting water conductivity shows a strong correlation with the total transferred charge in the gas phase. The total dissipated energy can potentially be used as a global measure to compare different experiments involving plasma–water interaction across different setups in different research groups.