EIT for tactile sensing: considering artefacts in hyperparameter selection

Abstract

Abstract Electrical impedance tomography (EIT) is employed in tactile sensing to create an image of impedance changes within a continuous sensor using electrodes placed only at the perimeter. Noise destabilizes EIT images, and the onset of instability is associated with the appearance of artefacts, which are spurious image features that are not associated with sensor responses to contacts. Artefacts are detrimental because the essential features of contacts, or targets, must be correctly represented, including how many there are and their approximate shapes and locations, yet their presence has not previously been used as a performance measure. Regularization, the extent of which is determined by the hyperparameter λ, is used to manage the destabilization, but it results in spatially non-uniform defocusing of image features. We therefore introduce an efficient criterion for evaluating tactile sensor image quality based on the onset of artefacts. Using simulated data and the one-step Gauss-Newton reconstruction algorithm with the Laplace prior, the noise level at which artefacts first appear at a given hyperparameter, or noise threshold Nth(λ), was found. How the relationship depends on target characteristics and other factors is shown, and Nth can vary by orders of magnitude. The conceptually similar BestRes method and the classical L-curve and generalized cross-validation (GCV) methods for determining an optimal hyperparameter are evaluated using the criterion of artefact-free images. The L-curve generates hyperparameters that are well matched to the onset of artefacts, except at high noise; the other two result in artefacts. For high dynamic range tactile inputs, setting the threshold at a fixed value using a method such as Nth is not advisable, and automatic regularization tailored to the input may be needed using a method such as the L-curve or GCV, provided that the computational overhead is tolerable.