Temperature-dependent resistance of carbon nanotube fibers

Abstract

Abstract Carbon nanotube fibers are highly recommended in the field of temperature sensor application owing to their excellent electrical conductivity and thermal conductivity. Here, this work demonstrated the rapid thermal response behaviour of CNT fibers fabricated by floating catalyst CVD method, which was measured by an in situ technique based on the CNT film electric heater with excellent electrothermal response properties. The temperature dependences of resistance and structure were both explored. Experimental investigation indicates that the reduction in the inter-CNT interspace in the fibers caused by thermally driven actuation was dominantly responsible for the decrease of the fibers resistance during the heating process. Especially, the heated fibers showed 7.2% decrease in electrical resistance at the applied square-wave voltage of 8 V, and good temperature sensitivity (−0.15% °C−1). The as-prepared CNT fibers also featured a rapid and reversible electrical resistance response behaviour when exposed to external heating stimulation. Additionally, with the increment of temperature and twist-degree, the generated contraction actuation increased, which endowed the CNT fibers with more decrease in electrical resistance. These observations further suggested that the temperature-dependent conduction behavior of the CNT fibers with a high reversibility and repeatability was strongly correlated with their structure response to heat stimulation. As a consequence, the temperature-conduction behavior described here may be applied in other CNT-structured fibers and facilitated the improvement in their temperature-sensing applications.