Abstract
Abstract
Rampant pathogenesis induced by communicable microbes has necessitated development of technologies for rapid and sustained disinfection of surfaces. Copper nanoparticles (CuNPs) have been widely reported for their antimicrobial properties. However, nanostructured copper is prone to oxidative dissolution in the oil phase limiting its sustained use on surfaces and coatings. The current study reports a systematic investigation of a simple synthesis protocol using fatty acid stabilizers (particularly essential oils) for synthesis of copper nanoparticles in the oil phase. Of the various formulations synthesized, rosemary oil stabilized copper nanoparticles (RMO CuNPs) were noted to have the best inactivation kinetics and were also most stable. Upon morphological characterization by TEM and EELS, these were found to be monodispersed (φ 5–8 nm) with copper coexisting in all three oxidation states on the surface of the nanoparticles. The nanoparticles were drop cast on woven fabric of around 500 threads per inch and exposed to gram positive bacteria (Staphylococcus aureus), gram negative bacteria (Escherichia coli and Pseudomonas aeruginosa), enveloped RNA virus (phi6), non-enveloped RNA virus (MS2) and non-enveloped DNA virus (T4) to encompass the commonly encountered groups of pathogens. It was possible to completely disinfect 107 copies of all microorganisms within 40 min of exposure. Further, this formulation was incorporated with polyurethane as thinners and used to coat non-woven fabrics. These also exhibited antimicrobial properties. Sustained disinfection with less than 9% cumulative copper loss for upto 14 washes with soap water was observed while the antioxidant activity was also preserved. Based on the studies conducted, RMO CuNP in oil phase was found to have excellent potential of integration on surface coatings, paints and polymers for rapid and sustained disinfection of microbes on surfaces.