Enhanced voltage response in TiO2 nanoparticle-embedded piezoelectric nanogenerator

Abstract

Abstract Poly (vinylidene fluoride) (PVDF) and its copolymers have piqued a substantial amount of research interest for its use in modern flexible electronics. The piezoelectric β-phase of the polymers can be augmented with the addition of suitable fillers that promote β-phase nucleation. In this work, we report an improved output voltage response of poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) with the incorporation of 10 wt.% Titanium (IV) oxide nanoparticles into the polymer matrix. The nano-filler was dispersed in the polymer matrix to form nanocomposite films via the solution casting technique. X-ray Diffraction and Scanning Electron Microscopy measurements were performed to verify the structure and morphology of the films. Fourier Transform Infrared Spectroscopy revealed enhancement in the β-phase nucleation from ∼15% to ∼36% with the addition of 10 wt.% titania nanoparticles. Thermogravimetric analysis and Differential Scanning Calorimetry results show improved thermal stability of the nanocomposite film, up to 345 °C, as compared to pristine PVDF-HFP. We also demonstrate a facile method for the fabrication of a piezoelectric nanogenerator with β-PVDF-HFP/TiO2 nanocomposite as an active layer. The outputs from the fabricated nanogenerator reached up to 8.89 V through human finger tapping motions, paving way for its potential use in the field of sensors, actuators, and self-sustaining flexible devices.