Machine for accelerated cyclic corrosion tests through alternate immersion in salt solution

Abstract

Abstract Metal structures corrosion is a problem of global economic importance. Typically, the corrosion process runs slowly, which requires accelerated methods for corrosion behaviour examination. The conditions when accelerated methods are used differ from the real ones, which affects the results obtained. One of the methods that relatively successfully reproduces corrosion in a natural atmosphere is included in the standard EN ISO 11130:2018 – Alternate immersion test in salt solution. Unlike other widespread methods, uneven corrosion occurs here, including spots and pits, which greatly affect the mechanical behaviour of the material. The commercial devices for such tests are quite expensive. This justifies the development and production of one’s own equipment as the one presented in this paper. The design, construction and production of a low-cost device are hereby described. The first results of the tests performed with this machine are also given. The corrosion rate of rods, 6 mm in diameter, from widely used steel grades – S235JR and S235JRC – was determined. The duration of the test was 42 days. The results were compared with those from another corrosion test method with the same duration – immersion in a solution of 3.5% NaCl.