Author:
Mallik M. Kedar,Seshagirirao D. V.,Padmaja K. J.,Mani B. Aditya,Pavan Sai,Bhagyasri P.
Abstract
Abstract
SS316 and SS304 are most widely used materials in mechanical engineering. Many times the products are subjected to tensile load during work. The knowledge of tensile properties is essential for the mechanical engineer working with materials. SS304 and SS316 samples were fabricated using Direct Metal Laser Sintering (DMLS) as per JIS standards in different orientations. The samples were then tested for their tensile strength. The same has been simulated on the NX platform for prediction of variations in the tensile strength with change in orientation. The results obtained from the simulation are observed to be in good agreement with the experiment results when the process parameters are same in both the cases. Further, the simulation has been used to predict the tensile strength of the samples that were not experimented.
Reference10 articles.
1. Effect of heat treatment on hardness and wear behaviour of weld deposited Co-Cr-Mo alloy;Mallik;Revista Materia,2015
2. Effect of Heat Treatment on Corrosion Behaviour of Weld Deposited Co-Cr-Mo Alloy;Mallik;ARPN Journal of Engineering and Applied Sciences,2016
3. Electro Chemical Behaviour of LENSTM Deposited Co-Cr-W Alloy for Bio-Medical Applications;Suresh,2018
4. Additive manufacturing of metals, a brief review of the characteristic microstructures and properties of steels, Ti6A1-4V and high-entropy alloys;Gorsse;Science and Technology of Advanced Materials,2017
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献