Response surface optimisation of biodiesel synthesis using biomass derived green heterogeneous catalyst

Abstract

Abstract Although homogeneous alkali-catalysed transesterification is the typical process used in biodiesel production, it caused complications in downstream separation processes and an oversupply of glycerol as a by-product. The present work studied the synthesis of a novel sulfonated biomass-derived solid acid catalyst and its application in biodiesel production via interesterification of oleic acid. Solid acid catalysts were prepared by direct sulfonation via thermal treatment with concentrated sulfuric acid. The design of experiments was conducted via four-factors central composite design (CCD) coupled with response surface methodology (RSM) analysis. The parameters considered for optimisation included carbonisation and sulfonation temperatures, catalyst loading and reaction time, each varied at five levels. The maximum yield of fatty acid methyl ester (FAME) was obtained using optimum parameters as carbonisation temperature of 586 °C, sulfonation temperature of 110 °C, catalyst loading of 10.5 wt.% and reaction time of 7 h was 54.3 % based on the theoretical ester formation. A quadratic mathematical model in RSM was successfully established that can make effective predictions about the anticipated biodiesel yield. This study proved that the low-cost heterogeneous catalyst derived from biomass waste with a simple production route could catalyse the interesterification process under moderate process conditions.