Author:
Singh Digvijay,Rawat Mohan,Singh S.P.,Chaudhary Rubina
Abstract
Abstract
The performance of the Photovoltaic (PV) module as a building material is analyzed by predicting the hourly variation in the room temperature compared to base case (conventional material). A computer simulation model of Fourier admittance method is used for the analysis. The average temperature fluctuation of PV roof and PV wall building compared to base case is 6.58°C and for PV wall 2.91°C respectively. The total daily energy generation from PV wall is found in the range of 6.7 kWh to 11.86 kWh, for PV roof its 17.24 kWh to 22 kWh. Due to temperature fluctuation the max additional daily cooling load obtained in PV roof case is 94.7 kWh and 41.97 kWh for PV wall.
Reference12 articles.
1. Validated simulation for thermal regulation of photovoltaic wall structures;Yang,1996
2. Meeting India’s future needs of electricity through renewable energy sources;Sukhatme,2011
3. An energy and exergy analysis of building integrated photovoltaic thermal systems;Agrawal;Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,2011
4. Performance evaluation of a building integrated semitransparent photovoltaic thermal system for roof and façade;Vats;Energy Build.,2012
5. Periodic modeling of semi-transparent photovoltaic thermal-trombe wall (SPVT-TW);Taffesse;Sol. Energy,2016
Cited by
12 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献