Author:
Safronov Eugene V,Nosko Andrey L
Abstract
Abstract
Brake roller is one of the safety elements of a pallet flow rack. At present, most widely used construction of brake roller is centrifugal friction roller (CFR). Efficiency of the CFR is ability to limit speeds of a pallet with different masses in pallet flow rack, and while the lower the speed, the higher efficiency of CFR. One of the parameters that affect to CFR efficiency is frictional lining position on the brake pads of CFR, which can be define with angle of brake lining position. The article is devoted to calculation the influence of angle of a brake lining position, its operating range finding. Analytical research was conducted for the CFR prototype. It is reported that effective areas of the angles is lies closer to the boundaries of operating range and it is non-effective to install a brake lining in the middle of the operating range.
Reference22 articles.
1. State-of-the-art approaches to material transportation, handling and warehousing;Sulirova;12th International scientific conference of young scientists on sustainable, modern and safe transport, Procedia Engineering,2017
2. Deep-lane storage of time-critical items: one-sided versus two-sided access;Boysen;OR Spectrum,2018
3. Robust storage assignment in stack- and queue-based storage systems;Boywitz;Comput. Oper. Res.,2018
4. Design and manage deep lane storage system layout. An iterative decision-support model;Accorsi;Int. J. Adv. Manuf. Technol.,2017
5. Structured comparison of pallet racks and gravity flow racks;Eo,2015
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Pallet Motion on a Magnetic Brake Roller;Acta Mechanica et Automatica;2022-01-01