Deep drawing simulation of dual phase steel using hardening curves and anisotropic parameters from uniaxial and biaxial tensile tests

Abstract

Abstract Among the various factors, the accuracy of the predictions from the numerical simulation of sheet metal forming processes depends on the material model used to define the mechanical behavior of the blank material. The coefficients of the hardening model to define the flow curve and the plastic strain ratios are commonly determined using the uniaxial tensile tests. The advanced anisotropic yield criteria incorporate material flow behaviour and plastic strain ratio in equi-biaxial tension. In this work, deep drawing of a flat bottom cylindrical cup has been simulated using dual-phase steel (DP600) sheets. The biaxial material properties obtained by conducting hydraulic bulge test and cruciform specimen test are used in the anisotropic yield criteria in the simulations. The hardening curves are extrapolated using different hardening laws in which the coefficients are determined from the stress-strain curves obtained from both uniaxial tensile and hydraulic bulge tests. The predicted peak drawing load and thickness variation in the drawn cups are compared with the experimental results of deep drawing.