Abstract
Abstract
Increasing requirements for product quality, whether from the side of technical standards or customers, generate demands on the optimization of measurement and data evaluation processes, which include also dimensional characteristics. The paper deals with determining the volume of the tank of a railway wagon with ribbing. In practice, volume flow meters are usually used to measure the internal volumes of manufactured tanks, which measure the volume of water when filled with water. The method is not only time-consuming but also energy-consuming and generates a large amount of wastewater. Therefore, these obsolete methods are gradually being replaced by those that allow effective inspection of tank wagon dimensions according to the technical documentation. The topic of the paper is a description and verification of the design of a progressive method of determining the internal volume of the tank using a spatial 3D scanner Faro FocusS150 and software processing of measured data. At the same time, verification of compliance with the requirements for the accuracy of determining the internal volume of the tank is presented. The aforementioned methods are therefore compared in terms of accuracy, complexity and time consumption.
Reference21 articles.
1. Mechanical Measurements. Vessel Capacity Measurement with Liquid Flowmeters;Pavlovskii;Measurement Techniques,1975
2. A Concept of Fuel Tank Calibration Process Automation Within IoT Infrastructure;Knyva;MAPAN-Journal of Metrology Society of India,2017
3. The Non-contact Precision Measurement for Spherical Metrology Tank;Wang;Journal of Physics: Conf. Series,2018