Research of composition porosity based on 3d-printed frames and impregnated with epoxy resin

Abstract

Abstract Annotation. The paper discusses a method of increasing the strength of 3D-printed structures made by the fused deposition modelling process, which consists in vacuum impregnation of printed products in a compound based on epoxy resin. Studied the number of pores in samples obtained by this method depending on the percentage of 3D printing filling and direction of layers relative to the axis of the samples. The porosity of the samples was determined by comparing the theoretical ideal density with the experimental value determined using the hydrostatic weighing method. As a result, it was found that the porosity of the samples lays in the range from 17 to 18.5%. It was also found that with increasing percentage of filling the porosity of the samples increases. It has been suggested that this dependence is associated with a complication of the processes of air release from samples during the impregnation.