Author:
Tomina A-M V,Yeriomina Ye A,Dašić Predrag
Abstract
Abstract
The article considers the influence of the content of HB-4 amorphous alloy on the tribological properties of aromatic polyamide phenylone C-2. It was found that the introduction of a dispersed filler in the amount of 10-20 mass.% leads to a positive effect: reduction of abrasion index and roughness during friction on rigid abrasive particles of the original polymer 4,7 and 1,4 times, respectively, reaching minimum values at 20 mass.% of the filler. The improvement in properties occurs due to the fact that the particles of the hard alloy (607–809 HV) strengthen the polymer matrix; as a result, the surface of metal polymers undergoes less deformation. It was found that the effective content of filler for aromatic polyamide is 20 mass.%.
Reference11 articles.
1. Investigation of the properties of carbon plastics based on polyetheretherketone;Burya;Journal of Research and Development in Mechanical Industry,2016
2. Study of the effect of transducer thickness and direction on the coercive force magnitude;Burya;Lecture Notes in Networks and Systems (LNNS),2020
3. Optimization of polychlorotrifluoroethylene processing technology by the response surface methodology;Kalinichenko;Lecture Notes in Networks and Systems (LNNS),2020
4. Influence of a hybrid filler on the coefficient of thermal linear expansion of phenylone C-2;Burya;Technological systems,2019
5. Structure and magnetic properties of amorphous alloys depending on the degree of crystallization;Goykhenberg;Bulletin of SUSU,2011