The metal gasket sealing performance of bolted flanged with fem analysis-Reference-Cited by-同舟云学术

The metal gasket sealing performance of bolted flanged with fem analysis

Published:2019-06-01 Issue:1 Volume:539 Page:012018
ISSN:1757-8981
Container-title:IOP Conference Series: Materials Science and Engineering
language:
Short-container-title:IOP Conf. Ser.: Mater. Sci. Eng.

Author:

Karohika I M G,Antara I N G

Abstract

Abstract There is a wide variation of flange style and configuration, but only four types of facing are widely used, which are raised face, flat face, ring joint facing and lap joint flange. Corrugated metal gaskets 400MPa-mode has better performance than gaskets 0Mpa-mode for flat face flange type. In this study we investigated the performance of corrugated metal gasket 400MPa-mode for three types of flange facing which are raised face, flat face and combination raised-flat face. The finite element method employed to analysis the effect of different types of flange on contact width and contact stress in relation with axial force of corrugated metal gasket. The result shows corrugated metal gasket 400MPa-mode give good performance for all type of flange face.

Publisher

IOP Publishing

Subject

General Medicine

Link

https://iopscience.iop.org/article/10.1088/1757-899X/539/1/012018/pdf

Reference9 articles.

1. Development of New Metallic Gasket and its Optimum Design for Leakage Performance;Saeed;Journal of Solid Mechanics and Material Engineering,2008

2. A Study of Design Standard and Performance Evaluation on New Metallic Gasket;Haruyama,2009

3. Simulation and Experimentation on the Contact Width of New Metal Gasket for Asbestos Substitution;Choiron;International Journal of Aerospace and Mechanical Engineering,2011

4. Optimization of New 25A-size Metal Gasket Design Based on Contact Width Considering Forming and Contact Stress Effect;Nurhadiyanto;International Journal of Mechanical and Aerospace Engineering,2012

5. Influence of surface roughness on leakage of new Metal Gasket;Haruyama;International Journal of Pressure Vessels and Piping,2013

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Topology Optimization of Motorbike Footsteps Using Finite Element Method;Engineering Innovations;2024-06-26

2. Design of motorcycle footstep holder using topology optimization;AIP Conference Proceedings;2024

3. The utilization of aluminum alloy waste as a footrests support for motorcycle;THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021);2023

4. Development of airless tires: A review;THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021);2023

5. An overview of the corrugated metal gasket;THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021);2023