Influence of dies type for gasket forming shape-Reference-Cited by-同舟云学术

Influence of dies type for gasket forming shape

Published:2019-06-01 Issue:1 Volume:539 Page:012019
ISSN:1757-8981
Container-title:IOP Conference Series: Materials Science and Engineering
language:
Short-container-title:IOP Conf. Ser.: Mater. Sci. Eng.

Author:

Karohika I M G,Antara I N G,Budiana I M D

Abstract

Abstract Performance of metal gasket influenced by the final design of the forming result. Good shape of the gasket will give optimal leakage performance. It is difficult to produce good shape because of the spring back effect. In this study, we investigated the forming process of metal gasket 400MPa-mode for two types of dies which are open dies and closed dies. The finite element method employed to analyze the effect of different types of dies on the final design of the corrugated metal gasket. The simulation shows corrugated metal gasket 400MPa-mode with closed dies result in better final shape than open dies.

Publisher

IOP Publishing

Subject

General Medicine

Link

https://iopscience.iop.org/article/10.1088/1757-899X/539/1/012019/pdf

Reference9 articles.

1. Development of New Metallic Gasket and its Optimum Design for Leakage Performance;Saeed;Journal of Solid Mechanics and Material Engineering,2008

2. A Study of Design Standard and Performance Evaluation on New Metallic Gasket;Haruyama,2009

3. Simulation and Experimentation on the Contact Width of New Metal Gasket for Asbestos Substitution;Choiron;International Journal of Aerospace and Mechanical Engineering,2011

4. Optimization of New 25A-size Metal Gasket Design Based on Contact Width Considering Forming and Contact Stress Effect;Nurhadiyanto;International Journal of Mechanical and Aerospace Engineering,2012

5. Influence of surface roughness on leakage of new Metal Gasket;Haruyama;International Journal of Pressure Vessels and Piping,2013

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The utilization of aluminum alloy waste as a footrests support for motorcycle;THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021);2023

2. Development of airless tires: A review;THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021);2023

3. An overview of the corrugated metal gasket;THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021);2023

4. Analysis of three-layer gasket performance affected by flange surface;EUREKA: Physics and Engineering;2022-07-30

5. Durability Assessment by Structural and Fatigue Analysis of Flow Control Valves (FCVs) for Hydrogen Refueling Stations;Transactions of the Korean Hydrogen and New Energy Society;2022-06-30