A comparative photon shielding properties of protective Window materials by using EGS5 code

Abstract

Abstract For an X-ray room, there is a special window for radiation workers to monitor the patient during an irradiation procedure. Lead glass commonly used as protective window materials for diagnostic X-rays even it is known for its toxicity due to the lead oxide in the air which could be inhaled either during manufacturing or recycled process. Monte Carlo simulation (EGS5 code) was used to study several other types of available protective windows for its radiation shielding efficiency. In this study, the practicability of acrylic glass, plate glass and Pyrex glass systems with respect to lead glass were studied for protective window materials. The photon attenuation coefficients (μ), the percentage of transmitted and reflected photon energy spectra and half-value layer (HVL) were investigated by using simulation. Three photon source energies of 59.5 keV, 150 keV, and X-ray 150 kVp were calculated via EGS5 code to study the capability of these four glass systems as low energy photons radiation shielding materials. A thickness of 7 cm plate glass, 8 cm pyrex glass and more than 10 cm acrylic glass are adequate as a non-lead shielding material for 150 kVp X-ray to have a similar lead-glass equivalency. The use of plate glass as radiation protecting material to replace lead glass can reduce expenses as plate is way cheaper than lead but the increase thickness of plate will need special framing and concerns of its increased weight needs to be considered. However, given that the X-ray primary beam will not be directed towards the protective windows, therefore the findings are appropriate, with less thickness of plate glass could be used.