Author:
Provatorova Galina,Vikhrev Alexander
Abstract
Abstract
To increase reliability and durability of road surfaces, asphalt concrete based on modified bitumens is actively used. Experts’ research shows that in modified bitumen extracted from road surfaces after 10 years of operation there are no significant changes in viscosity. The purpose of this study is to improve the properties of bitumen and asphalt concrete based on it by modifying road bitumen with carbon nanotubes. Bitumen was modified with carbon nano-tubes obtained by deposition from the gas phase in the laboratory of Vladimir State University. The selection of the optimal amount of the introduced modifier was performed, modified bitu-men was prepared, its properties were determined, and a comparative analysis of the properties of asphalt concrete made on modified and non-modified bitumen was carried out. Due to the introduction of carbon nanotubes into the heated bitumen, the strength and elasticity of the resulting asphalt concrete are significantly increased. The test results showed an improvement in all quality indicators of asphalt concrete by 7-9%, which allows us to say that the resulting composite has increased strength characteristics.
Reference25 articles.
1. A review of using natural rubber in the modification of bitumen and asphalt mixtures used for road construction;Al-Sabaeei;J. Teknol.,2019
2. Rubber-modified hot-mix asphalt pavement by dry process;Hernandez-Olivares;Int. J. Pavement Eng.,2009
3. Engineering properties of crumb rubber modified dense-graded asphalt mixtures using dry process;Hassan;IOP Conf. Ser.: Earth Environ. Sci.,2019
4. Rutting and moisture damage evaluation of warm mix asphalt incorporating POFA modified bitumen;Abdulrahman;Int. J. Eng. Adv. Technol.,2019
5. Effect of mechanochemical activation of binder on properties of fine-grained concrete;Ibragimov;Mag. Civ. Eng.,2015
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献