Author:
Slavkina V E,Shitov A O,Lopatina Yu A
Abstract
Abstract
This work is devoted to the study of tribotechanical properties of 3D printed samples from ABS plastic. The results of determining the coefficient of friction and mass wear of the samples obtained by 3D-printing with different printing heights during the friction testing on machine II 5018 are presented. It is shown that in order to reduce the coefficient of friction and mass wear of the ABS plastic specimen, it is recommended to produce specimens with a higher print height. 3D printed parts with 0.3 mm layer height have shown the best results because of greater layer adhesion.
Reference10 articles.
1. Hydrolytic destruction of agrofiber made of natural polymers;Tertyshnaya Yu;FIB. CHEM.,2019
2. 3D-printed polyether ether ketone samples mechanical properties estimation;Sviridov;IOP Conf. Series: Materials Science and Engineering,2019
3. Development of a high strength polymeric composite material using 3D-printing and vacuum impregnation technology;Lopatina Yu;IOP Conference Series: Materials Science and Engineering,2020
4. Design of the solar panel frame of the spacecraft by 3D printing with composite materials;Mirzaev;IOP Conference Series: Materials Science and Engineering,2019
5. Tribotechnical properties of composite materials based on epoxy polymers;Lavrov;Polymer Science: Series D,2019