Development of control systems on vacuum evaporators with 50 l capacity to reduce honey water content accordance to sni 01-3545-2004

Abstract

Abstract Riau still has many protected forests and nature reserves. One of the wealth of protected debt is the forest’s Honey. One of the weaknesses of forest honey is the high water content in honey. The permissible water content in honey is 22% based on SNI 01-3545-2004. This paper presents a vacuum evaporator of control system design as a tool for reducing the water content in Honey. The control system design is made such that the honey temperature in the evaporation process is no more than 40°C. There are three quantities that are controlled in this process, namely vacuum chamber pressure, temperature and screw rotation. Temperature control system and pressure control system use close loop system, while the control system for screw rotation uses open loop system. The three main components of this control system are the VE 115N vacuum pump, the stirring screw motor with 1 HP power, 2 heaters with 250 watts of power each, Temperature Control (Eliwell IC901 thermostat and thermistor sensor), 35x25 panel box. To meet the quality of honey, the control system is set with a maximum temperature of heating water 40°C and vacuum pressure at 7.4 kPa and screw rotation at 60 rpm