Author:
Kroll D,Howard J,Knudsen P,Hasan N,Ganni V
Abstract
Abstract
The main helium refrigeration system at FRIB is designed for a maximum capacity of 180 g/s (30K, 1.16 bar) cold compressor return flow, 14.0 g/s of 4.5 K liquefaction load, 4.0 kW 4.5 K refrigeration load and a 20.0 kW (35 – 55 K) thermal shield load. The helium refrigeration system operates using the Ganni Floating Pressure process and can adjust to a range of variable cryogenic load conditions without any artificial loads. It is designed considering long-term 24/7 support for the loads (cryostats and superconducting magnets) maintained at 4.5 K, without the need for a complete warm-up to room temperature. A number of maintenance, repair and outage scenarios, and the corresponding stand-by operating modes for the refrigeration system with the base-line cryogenic load have been considered, tested and analysed. This paper reports an overview of these stand-by modes and the associated analysis.
Reference10 articles.
1. Status of the FRIB project with a new fragment separator;Morrissey;Journal of Physics: Conference Series,2011
2. Cryogenic design of FRIB cryomodule and distribution system and the present status;Ganni;IOP Conference Series: Materials Science and Engineering,2020
3. Design, Fabrication, and Installation of the Cryogenic Distribution System from FRIB Target and Fragment Pre-Separator Superconducting Magnets;Hasan;IOP Conference Series: Materials Science and Engineering,2021
4. FRIB cryogenic distribution system;Ganni;AIP Conference Proceedings,2014
5. FRIB helium refrigeration system commissioning and performance test results;Knudsen;IOP Conference Series: Materials Science and Engineering,2020