Influence of Textured Nickel/Palladium/Gold-Silver (Ni/Pd/Au-Ag) Layer on Pre-plated Leadframe for Automotive Applications

Abstract

Abstract High quality and reliability of integrated circuit packaging is required for automotive applications due to the safety concerns. Therefore, elimination and controlling the package defects which can lead to reliability failure is essential. One of the defects that leads to reliability issue is delamination. This study presents the influence of textured leadframe surfaces on the surface wettability and delamination occurrence in automotive package unit. Standard bare Cu leadframe was used as comparison. The leadframe surface was textured with Ni/Pd/Au-Ag using electroplating technique. The surface morphologies of both bare and textured leadframe were characterized using field-emission scanning electron microscope and optical profiler. The energy dispersive spectroscopy was used to quantify the elemental composition of the samples. All samples went through the wettability test under two conditions, which were room temperature and 175°C. The reliability test of complete package was subjected to moisture sensitivity preconditioning level 1 according to IPC/JEDEC STD 020 and the baking process was performed at 125°C for 24hrs followed by soaking process under the condition of 85°C and 85 of relative humidity. Scanning acoustic tomography according to IPC/JEDEC STD 035 was performed after three cycles of infrared reflow at 260°C. Higher surface roughness was observed for pre-plated leadframe (PPF) compared with bare leadframe. The lowest value of average contact angle (∼55°) was observed for PPF at 175°C indicated better wettability feature. Furthermore, no delamination occurrence was observed for PPF sample compared with bare copper leadframe. The obtained result reveals that leadframe with textured surface of Ni/Pd/Au-Ag improved interfacial surface adhesion which eliminated the delamination defect and thus improved the package robustness and reliability.