Author:
Qi Y Y,Ma X G,Ma L N,Wang T,Jiang Z Y,Dobrzański L A,Zhao J W
Abstract
With the advantages of high utilization of raw materials, high precision and low cost, micro metallic parts produced by micro deep drawing (MDD) have been tremendously used in a variety of fields such as micro-electromechanical systems (MEMS), vehicle engineering and chemical engineering. In order to study the deformation behavior of two-layer stainless steel-copper composite foils during MDD, a series of MDD tests were performed with specimens annealed at temperatures ranging from 600 to 1000 °C. The results show that complete circular cups cannot be formed using the as-received material due to its poor formability. For the specimens annealed at 600 and 700 °C, significant wrinkling is observed on the drawn cups. Differently, few wrinkles are characterized on the drawn cups when the composite foils are annealed at temperatures ranging from 800 to 1000 °C. An optimal annealing temperature of 800 °C is obtained for the MDD of stainless steel-copper composite cups with high surface quality.