Improvement of hot corrosion resistance of dissimilar weldments by current pulsing in a simulated power plant environment

Abstract

Abstract Hot corrosion studies are of utmost importance for welded components in the power plant industry as well as for industries which deal with exposure to the high-temperature corrosive environment. The failure of welded components at high temperatures has often led to the reduced service life of a component and catastrophic disasters. This has been a significant engineering challenge in the design of welded components. It is generally seen that the failure of the welded sections mostly occurs because of the deposition of molten salt over the weldments which accelerate the hot corrosion reactions. In this present research work, two dissimilar base materials, AISI 4340 and AISI 304L have been welded with two different welding processes namely continuous current gas tungsten arc welding (CCGTAW) and pulsed current gas tungsten arc welding (PCGTAW) while making use of ERNiCr-3 as filler material. A comparative study of the dissimilar welded plates was carried out by simulating a molten salt environment at 600°C involving hot corrosion behavior. By analyzing the microstructure and thermo-gravimetric data, it is concluded that the pulsed current gas tungsten arc welding process has superior corrosion resistance properties while using ERNiCr-3 as the filler material as compared to the continuous current gas tungsten arc welding process.