Author:
Mingulov Sh G,Mingulov I Sh,Mukhametshin V V
Abstract
Abstract
The authors laid bare a correlation between the proportion of mechanical contaminations and oil products in discharge waters and the average oil viscosity in the field. Film thickness depends on the oil viscosity. More viscous oil forms thicker and heavier films on the surface of suspended solids. The use of electrical centrifugal pumps for fossil water injection into the well allows using the heat produced by the pump to warm the water. Standard measurement instruments show that the change of injected water temperature at the head of the well pump-over unit is between 1.1 and 8.4 °C. The average temperature increase is 3.6 °C.
Reference14 articles.
1. On uncertainty level reduction in managing waterflooding of the deposits with hard to extract reserves;Mukhametshin;Bulletin of the Tomsk Polytechnic University. Geo Assets Engineering,2020
2. Use of low-mineralized water for displacing oil from clay productive field formations;Stenkin;IOP Conference Series: Materials Science and Engineering (MEACS 2018 – International Conference on Mechanical Engineering, Automation and Control Systems),2019
3. Substantiation of the recovery of residual oil from low-productive and heterogeneous formations in Western Siberia by improving the waterflood system using gas and water-gas impacts;Valeev;IOP Conference Series: Materials Science and Engineering (MEACS 2018 – International Conference on Mechanical Engineering, Automation and Control Systems)
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献