The Effect of Ramp Location in a Strut Based Scramjet Combustor under non reacting flow field

Abstract

Abstract The scramjet engine is considered to be the high-speed propulsive system for hypersonic air-breathing vehicles. Researchers focus on various geometries of strut injectors to enhance the mixing and combustion efficiencies of the scramjet combustor. This paper reveals the non-reacting flow characteristics of various ramp locations in a scramjet combustor with strut injection. The ramps are symmetrically placed at three different locations upstream of the strut within the combustor. Air enters into the combustor inlet with Mach number 2, and the fuel is injected at the sonic velocity from the strut. The 2D supersonic flow characteristics are numerically investigated using ANSYS 18.0 software. The steady-state flow simulations are performed in this study. The flow field is modelled using RANS equations, and the k-ω SST turbulence model and default constants are chosen to investigate the flow characteristics within the combustor. The flow characteristics of the ramp based DLR scramjet combustors are compared with the baseline DLR scramjet model. The computational results are validated with the experimental data. The shock wave interaction from the ramps enhances the distribution of hydrogen in the lateral direction of the flow than the baseline strut configuration. The ramps create recirculation regions that could enhance fuel-air mixing. The ramp induced strut based DLR scramjet engine provides increased total pressure loss of the baseline DLR scramjet.