Assessment of the Engineering Properties of Modified Asphalt Using Aluminium Dross as a Filler

Abstract

Abstract Aluminum dross waste creates environmental burden for manufacturers and hence the need for its re-use. This experimental research assessed the engineering properties of modified asphalt using aluminium dross as a filer material. The aluminium dross used was obtained from a steel manufacturing industry. Elemental composition of the oxides was done using XRF equipment. Sieve analysis of the aluminium dross and the coarse aggregate was also assessed. Additionally, ductility, penetration, ball and ring and Marshall stability test were used in achieving the aim of this research. The outcome of the research revealed that 10-20% addition of the aluminium dross improved the stability of the modified asphalt. Physical observation revealed that the utilization of the waste stiffened the modified asphalt. The result showed that the addition of aluminium dross reduced the VMA. This will also increase the asphalt mix flushing. Additionally, at higher percentage addition of the waste the stiffness of the asphalt mix increases especially at a higher temperature. The use of this material will help in the reduction of solid waste and reduce the cost of management while reducing the cost of pavement construction in track with the trash to treasure drive.