Author:
Waldi Eka Putra,Lestari Asri Indah,Fernandez Rudy,Mulyadi Saifa,Darmawan ,Laksono Heru Dibyo,Andre H,Aulia ,Hazmi Ariadi,Murakami Yoshinobu,Hozumi Naohiro
Abstract
Abstract
Partial-discharge is a symptom of high voltage insulation aging, which is a small voltage pulse with high frequency and superposition with high voltage sources that have low frequencies. To find out the existence of this signal, it needs a reliable measurement technique to avoid misinterpretation. This paper presents a technique for measuring partial discharge with an induction method. The sensor used is circular twin loops. The first loop passes through a partial discharge signal, and the second induction receiver produces an induced voltage signal. Various sizes of loop diameters are designed with dimensions 3.2, 4.7, 8.9, and 11.4 cm to look for sensor sensitivity. The performance sensor is analyzed by reading the sensitivity test to the input given with 50-ohm oscilloscope impedance. From the measurement results, the higher the diameter of the sensor loop has good sensitivity.