Author:
Cheng Lei,Zhang Zhenwei,Zhao Xinyu,Lin Qia
Abstract
Abstract
To figure out the law of the height of stirred blade installed inside the reactor affect the fluid inside, this article used CFD to Numerical simulation of the liquid filled area of the stirred reactor, then obtain the distribution of the liquid velocity field inside the reactor.Through the comparison of calculation. Consider the weak area of stirred mainly concentrated above the stirred blade, when stirred blade were installed at the stirred blade mounting height-to-liquid level-ratio reach to 40%, ti means the mixing level reach maximum, according to the calculation the average turbulence kinetic energy is 0.003407-40 0.002994-45. and standard deviation of turbulence kinetic energy is able to stable between 0.001503-40 to 0.001275-45.
Reference6 articles.
1. CFD simulation of liquid-phase mixing in solid–liquid stirred reactor;Kasat;J. Chemical Engineering Science,2008
2. CFD simulation of bubble column—an analysis of interphase forces and turbulence models;Tabib;Chem. Eng. J.,2008
3. Euler-Euler simulation and X-ray measurement of bubble chain in a shallow container filled with liquid metals;Liu;J. Chemical Engineering Science,2018
4. Enhancements of the SIMPLE method for predicting incompressible fluid flows;Van Doormal;Nnumerical Heat Transfer,1984
5. Computational fluid dynamics(CFD) simulation of effect of baffles on separation in mixer settler;Shabani;J.International Journal of Mining Science and Technology,2012
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献