Surface modification of W–Ta–V–Cr multi-component alloy after low-energy He plasma irradiation

Abstract

Abstract This study explores a hypothetical scenario where low-activation refractory multi-component alloys (RMCAs) are considered for use as divertor target materials in fusion reactors. To investigate the surface modifications under divertor service conditions, a multi-phase W–Ta–V–Cr RMCA is irradiated with low-energy helium (He) plasma at varying temperatures to approximately 5.0 × 1025 He·m−2. The W-rich and Cr-rich phases in the multi-phase RMCA mimic the mono-phase W–Ta–V–Cr RMCA and segregation at grain boundaries, respectively. Following irradiation, fuzz layer formation is observed for all phases at temperatures lower than pure W requires. Additionally, nano He bubbles are identified in the fuzz tendrils at 920 °C. The modified layers exhibit reduced V and Cr content with increasing temperature, transitioning into W-Ta binary alloys at 920 °C. Notably, the fuzz layer on the W-rich phase is thinner than that on pure W at 920 °C. While a thinner fuzz layer suggests the alloy’s potential as a divertor target material, challenges include a lower fuzz formation temperature and potential high V and Cr sputtering yield, raising concerns for plasma contamination during fusion reactor operation. This dual perspective highlights both the promise and challenges of utilizing RMCAs as divertor target materials in severe fusion reactor environments.