Developments towards an ELM-free pedestal radiative cooling scenario using noble gas seeding in ASDEX Upgrade

Abstract

Abstract Integrated edge-localized-mode (ELM)-free or small ELM scenarios for the demonstration fusion power plant (DEMO) are investigated in ASDEX Upgrade using argon seeding for radiative power removal mainly in the pedestal region. An important aspect is the modification of the electron pressure in the pedestal by the additional radiative power losses. Full ELM suppression could be achieved in a no-ELM H-mode scenario featuring an edge electromagnetic quasicoherent mode up to a heating power of 5 MW, where argon radiation allowed the extension of the heating power operational space. At higher powers up to 12 MW (reaching the beta limit), ELMs of reduced size prevail and detachment is obtained by the argon seeding. Control of the position of a radiating zone localized inside the X-point was found to be favorable compared to the control of the separatrix power for low P s e p / P h e a t . Integration of pedestal cooling with Ar and ELM suppression by resonant magnetic perturbations (RMP) allowed an increase of the core radiation and a partial recovery of normalized confinement to H98 = 1. This favorable behavior is finally limited by the loss of the RMP density pump-out effect, followed by an ELM-free H-mode phase and re-occurrence of ELMs. For an active tailoring of the pedestal pressure profile, precise knowledge of the radiation profile is required. Modeling of the argon radiation profile with the STRAHL code showed good agreement with bolometry only if charge exchange of neutral deuterium with argon ions was taken into account, highlighting the importance of the neutral density in the pedestal region. In view of best integration of a no-ELM scenario with divertor detachment and high heating power, the divertor compression and enrichment of argon and neon were compared using dynamic gas puff experiments. Argon shows more than a factor of 3 higher divertor enrichment compared to neon, but the absolute values decrease with higher neutral deuterium pressure.