Characterization of a composite polylactic acid-hydroxyapatite 3D-printing filament for bone-regeneration

Abstract

Abstract Autologous cancellous-bone grafts are the current gold standard for therapeutic interventions in which bone-regeneration is desired. The main limitations of these implants are the need for a secondary surgical site, creating a wound on the patient, the limited availability of harvest-safe bone, and the lack of structural integrity of the grafts. Synthetic, resorbable, bone-regeneration materials could pose a viable treatment alternative, that could be implemented through 3D-printing. We present here the development of a polylactic acid-hydroxyapatite (PLA-HAp) composite that can be processed through a commercial-grade 3D-printer. We have shown that this material could be a viable option for the development of therapeutic implants for bone regeneration. Biocompatibility in vitro was demonstrated through cell viability studies using the osteoblastic MG63 cell-line, and we have also provided evidence that the presence of HAp in the polymer matrix enhances cell attachment and osteogenicity of the material. We have also provided guidelines for the optimal PLA-HAp ratio for this application, as well as further characterisation of the mechanical and thermal properties of the composite. This study encompasses the base for further research on the possibilities and safety of 3D-printable, polymer-based, resorbable composites for bone regeneration.