Author:
Wang Jiawen,Liang Jingqi,Wang Rui,Qi Xiaobin
Abstract
Abstract
Based on the proper improvement and development of the basic principle of digital image correlation method, a 3D-DIC measurement system is built. Its measurement principle and application process can be divided into four steps: camera calibration, image acquisition, image matching and three-dimensional reconstruction. The measurement system can realize non-contact and full-field measurement and has the advantages of not being affected by the test environment, not imposing additional mass on the test model, and high signal-to-noise ratio of the measured data. Taking the elastic plate model as an example, the accuracy and reliability of the measurement system in the measurement of static and dynamic displacement response are verified by using the measurement results of laser displacement meter as a reference. In addition, the tensile strain of the projectile aluminum alloy tail model and the ground mode of the elastic plate are tested to further verify the practicability of the test system.
Subject
General Physics and Astronomy
Reference16 articles.
1. System Identification of Mechanomyograms Detected with an Acceleration Sensor and a Laser Displacement Meter [J];Uchiyama,2011
2. Validation Study of Pressure-Measurement Systemwith Laser Displacement Sensor and Film [J];Tezuka;46th AIAA Aerospace Sciences Meeting and Exhibit.,2008
3. A Novel Rotary Acceleration Sensor [J];Godler;IEEE Control Systems.,1995
4. Development and Field Testing of a Multi-Antenna GPS System for Deformation Monitoring [J];Ding;WUHUA UNIVERSITY JOURNAL OF NATUREAL SCIENCES,2003
5. An efficient approach for stereo matching of planar objects in stereo-digital image correlation [J];Shao;Measurement Science and Technology,2017