Effect of Milling Parameter on the Surface State of Ultra-high strength Steel 16Co14Ni10Cr2Mo

Abstract

Abstract The machining mechanism and process parameters of ultra-high strength steel 16Co14Ni10Cr2Mo are still lack of complete understanding. By changing the milling condition, the influence of process parameters on cutting force, such as Radial milling depth, Axial milling depth, Feed per tooth and milling speed, is studied,and in the meanwhile that the surface morphology and hardness of 16Co14Ni10Cr2Mo after machining are analyzed. Indicating that the milling force increases with the increase of axial milling depth, feed rate and radial milling depth. With the increase of milling speed, the milling force reduces. The effect of axial cutting depth and radial cutting depth on cutting force is maximum. For 16Co14Ni10Cr2Mo ultra-high strength steel, it is suitable to use small cutting depth and high milling speed. On the surface of milling material, partial melting and partial oxidation of chips occur. When the milling speed and feed rate increased, the surface hardness of the material did not change significantly, and there was no work hardening.