Author:
Liu Linlin,Wang Xinyi,Du Jinqiao
Abstract
Abstract
The paper analyzed the martensite transformation characteristic of Fe-Mn-Si alloy by XRD analysis and tensile test under different deformation condition. In this study, the amount of ε martensite of Fe-17Mn-5Si-10Cr-5Ni alloy was lower than that of Fe-17Mn-5Si-2Cr-2Ni-1V alloy under the same deformation condition, but the change rate of ε martensite was much higher than that of Fe-17Mn-5Si-2Cr-2Ni-1V alloy, and the stress relaxation rate of the both alloys increased with the increase of the stop loading time, and the relaxation rate of the Fe-17Mn-5Si-10Cr-5Ni alloy was obviously higher than that of Fe-17Mn-5Si-2Cr-2Ni-1V alloy. (Abstract)
Subject
General Physics and Astronomy
Reference7 articles.
1. The influence of rapidly solidification on the structure and property of the Fe-Mn-Si base shape memory alloy;Yang;Journal Functional Materials,2011
2. Development of Fe-based shape memory alloys associated with face-centered cubic-hexagonal close -packed martensitic transformations: Part I. shape memory behavior;Yang;Metallurgical Transactions A,1992
3. On the improvement of shape memory effect in Fe-14Mn-6Si-9Cr-4Ni alloys by thermomechanical treatment;Gu;Scripta Metall.,1994
4. Study to the effect of stress and strain on martensite transformation kinetics and transformation plasticity;Liu;Acta Metallurgica Sinica,1999