External Measurement System for Aircraft Structural Parts Based on Digital Image Correlation in Signal-limited Spaces

Abstract

Abstract An experimental study was performed on the application of the digital image correlation (DIC) technique to characterize aircraft components for which accurate time information is required. This study builds an aircraft external measurement system based on Stereo DIC. This system obtains real-time satellite time information from a GPS clock source and transmits it to a trigger unit. A camera acquires this information and displays it on the image. This solves the problem that some closed laboratories can use only computer time and cannot obtain accurate satellite time when using camera measurements. Moreover, we verify the reliability and accuracy of this approach, finding an average angular accuracy of better than 0.02 degrees and a relative error of less than 1%. Using the binocular Stereo DIC system, the accuracy of the measurements is clarified for specific conditions. Furthermore, we use this system to measure simulated aircraft landing gear, which moves at an angular velocity of 52.4 °/ s over a distance of 5 m with a wide field of view of 16.8°. The satellite time information acquired by the camera and the time information of the captured time targets are highly stable. The system’s reliability is demonstrated for use in practical engineering, contributing to the engineering application of Stereo DIC for external aircraft measurements.