Strength analysis of flat manhole cover in case of change of location and inclination angle of two mutually intersecting scratches

Abstract

Abstract Mechanical damages of the main structural elements of the process equipment of hazardous production facilities are quite often detected during the revision process after repairs when assessing the quality of the work performed. One of the most common mechanical damages on the surface of parts and assemblies of technical devices includes scratches and risks. Significant scratches and risks that have a relatively large area and depth and limit the commissioning of the facility are subject to sampling and removal during re-repair. Superficial and non-extended scratches and risks do not belong to unacceptable defects, the technical device should not be taken into account, and further operation occurs with their presence. During further operation of the facility, such defects may not manifest themselves in any way, but may be high-voltage concentrators, which in the vast majority of cases are not critical. However, the presence of two or more scratches on the surface of the structural elements, their different location relative to each other, and therefore different mutual influence, can have a significant effect on the redistribution of zones and values of increased stresses on the surfaces where they are located. In the current regulatory and technical documents for diagnostics, these points are not considered, and accordingly are not taken into account. Therefore, the actual work is to perform a strength analysis of a flat manhole cover with two scratches, which have a different location on the surface, and a different angle of intersection relative to each other.